Re: PIX behind route

PIX Version 6.3(4)
interface ethernet0 auto
interface ethernet1 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password jSl27glGzSw1DAQV encrypted
passwd jSl27glGzSw1DAQV encrypted
hostname cp03cn
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
pager lines 24
mtu outside 1500
mtu inside 1500
ip address outside 192.168.9.253 255.255.255.252
ip address inside 192.168.8.253 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
pdm history enable
arp timeout 14400
route outside 0.0.0.0 0.0.0.0 192.168.9.254 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225
1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
telnet timeout 5
ssh timeout 5
console timeout 0
terminal width 80
Cryptochecksum:0cccb8aa20d0ed691cc719ec32d457e8
: end

areaB(config)# ping 192.168.4.9
        192.168.4.9 response received -- 20ms
        192.168.4.9 response received -- 10ms
        192.168.4.9 response received -- 10ms

i can go every where in my area B PIX
any acl or routing i need to add ??cause the areaB's workstation cannot
ping areaA

Thanks

Antony

thanks

Antony
Received on Mon May 1 01:07:12 2006